-- 7 --
1. Icon illuminates when ON
2. Ambient Temperature Indicator: blank means the ambient temperature is low and full means ambient temperature is
high.
3. Icon Illuminates when ON
4. Bottom tank water lever indication: the arrow indicates water level, number increase as water level rises.
5. Top tank water lever indication: the arrow indicates water level, number increase as water level rises.
6. Water generating indicator: when icon lights is on without drop means the machine is under normal condition, when
icon shows drop down, the machine is generating water.
7. Icon Illuminate when ON.
8. Defrosting temperature indication: blank means defrosting temperature is low, full means defrosting temperature is
high, defrosting temperature is the temperature of the evaporimeter surface.
9. Icon Illuminates when on.
10. Defrosting temperature display: press C/F key on the panel to convert centigrade & Fahrenheit value.
11. Defrost icon: icon flashing means the machine is defrosting (certain areas may arise frosting due to too low a
temperature.
12. Recycle icon: icon flashing means top tank water is recycling.
13. Filter indicator: when icon
light on means normal, flashing means need to replace filter or clean up is
needed. Replace operation refer to the section about machine cleaning, sterilization and replacement
14. Warning indication: the icon lights on means normal. When the machine waterway appears phase sequence
error, High and low voltage alarm ring out,
faults such as operation of thermal relay, this icon will be flashing.
15. Humidity indicator: indicating current humidity value.
16. Booster pump icon: the icon lights on means normal, icon flashing means the pump is working.
17. UV warning icon: icon lights on means normal, if it blinks means UV light is working.
18. Bottom tank UV light indicator: icon light on means normal, if it flashes, top tank UV light is functioning.
19. Reflux UV light icon: icon light on means normal, if it flashes, reflux UV light is functioning.
20. Top tank UV light icon: icon light on means normal, if it flashes, top tank UV light is functioning.
21. Hot water temperature indicator: press C/F key on the panel to convert centigrade & Fahrenheit value.
Press MODE button to enter debug function, press UP or DOWN to show needed parameter.
T0 Compressor starting time.
T1 Defrost entry time.
T2 Defrost exit time T3 30 minutes memory time for bottom tank water to fill-up.
T4 timing of 2-hour recycling T5 Action time of recycling
T6 Timing of water pump 60-minute action T7 Lower than bottom water tank upper limit
The Last Failure Cause
Press and hold the C/F button to enter filter setting menu (including entering password), press up and down button to
choose sub-items
（
filter
，
password
），
Press the C/F button to enter sub-items,
press up and down button to change the
value
,
Press C/F button to save and exit sub-items.
Press and hold C/F button to exit filter setting menu.
Press and hold RESET to enter filter reset menu. Press up and down to select sub-item (filter working time), press
RESET to clear up, long press RESET to retreat from filter reset menu, working time can be cleared in the reset menu
only after entering correct password in the setting menu. Working time is counted in days, and filter time counted in
hours.
