-- 17 --
Ⅰ
- 2.9
Ⅰ
- 2.10
Ⅰ
- 2.11
3. Sanitation steps
1. Prepare 25 liters of Hydrogen Peroxide solution at 1:300 (Water can be obtained from the machine).
2. Press STOP button to stop the machine running and drain off water in top tank
，
take out (picture-1-3.1) post active
carbon out(picture-I-3.2), replace filter cup back to sterilize filter cup.
3. Open top cover and tank cover (handle with care to avoid damage to water level sensor and UV). Fill the solution.
prepared into top tank and replace back tank cover.
4. Disconnect the connectors of top tank water level sensor wiring (picture I-3.2). and short them with short piece of
wire. (Picture
Ⅰ
-3.4)
；
Ⅰ
- 3.1
Ⅰ
- 3.2
第
五
级
