Weq 105 A, Руководство пользователя

Страница: 83 / 91

Technical Specifications
8-4
8
Depending on the inverter usage conditions (surrounding air temperature, output frequency, possibility or not
of reducing the carrier frequency, etc.), the maximum time for operation of the inverter with overload may be
reduced.
(3) The carrier frequency may be automatically reduced to 2.5 kHz depending on the operating conditions
(surrounding air temperature, output current, etc.) - if P0350=0, 1, or 4.
(4) The motor ratings are merely a guide for 220 V or 440 V, IV pole WEG motors. The adequate inverter sizing
shall be based on the rated current of the motor used.
(5) Models that can operate from single-phase or three-phase power supply have their input current stated in
both cases. The single-phase input current is provided first.
(6) The information provided about the inverter losses is valid for the rated operating condition, i.e., for rated
output current and rated carrier frequency.
(7) The dissipated power provided for flange mounting corresponds to the total inverter losses disregarding the
power module (IGBT and rectifier) losses.
(8) If the inverter is to be provided with this option, it should be specified in the intelligent identification code of the
inverter. Exception: the RFI filter is already incorporated in models CFW110006S2OFA and CFW110007S2OFA.
For further details, please refer to chapter 2.