Wenglor UMF303U035, Руководство по эксплуатации

Страница: 10 / 23

EN
10 Mounting instructions
5. Mounting instructions
During mounting and operation of the sensors, the corresponding electrical and mechanical regulations, as
well as safety regulations must be observed. The sensor must be protected from mechanical impact. The
product has to be mounted so that the mounting position can not be changed.
• Make sure that the sensor is mounted in a mechanically secure fashion.
• If the object has smooth surfaces, the angle between the axis of the sound waves and the surface of the
object should be 90° ±3°. The angle can be considerably larger in the case of rough object surfaces.
• The active surface of the sensor may not contact any other machine parts.
NOTE!
Observe the blind spot.
In the area between the sensor’s active surface and the beginning of its working range, cor-
rect functioning of the sensor is not assured. No objects may be located in this area.
Object position Switching
position /
switching LED
Error output /
error LED
Measured value,
IO-Link
Working range × Defined Defined Defined
Blind spot × Undefined Undefined Undefined
Above the
working range
× Defined Defined Defined