Wenger Corner Cabinet, Руководство по сборке

Страница: 47 / 52

47
3. Fasten the Center Column Assembly components to the Corner Cabinet as follows.
a. With two people working together, slide the Base Frame, Center Column and Top Plate
(assembled together) through the doorway into the Corner Cabinet. It may be necessary to
rotate the Base Frame Assembly as it is pushed through the doorway.
NOTE: The Center Column Assembly can be placed inside the Corner Cabinet without
removing any panels (such as the Top Panel or side panels).
b. Rotate the Base Frame Assembly (10) so that the two short legs face the back panels (see
illustration below) and the wings rest on top of the Base Frame.
c. Align the four Clearance Holes in the Base Frame Assembly Wings (10) to the four
3
/
8
" diameter
clearance holes in the Bottom Frame.
d. Insert four Capscrews (3) into the clearance holes on the Base Frame Assembly (10) and, using
a
9
/
16
" wrench or socket and ratchet, screw the Capscrews (3) into the Bottom Frame.
e. Turn the Top Plate Assembly (9) so that the four Clearance Holes in the corners align with the
four holes on the inside surface of the Top Panel (these holes have Screw Inserts on the outside
surface).
f. Insert four Capscrews (1) into the four Top Plate Assembly (9) Clearance Holes and, using a
7
/
16
"
wrench or socket and ratchet, screw the Capscrews (1) into the four Top Panel Screw Inserts.
Top Panel
(shown cut away)
Screw Insert
Center Column Assembly (11)
Top Plate Assembly (9)
Capscrew,
3
/
8
-16 x 1
3
/
4
" (3)
Clearance Hole
Capscrew,
1
/
4
-20 x
3
/
4
" long (1)
Top Panel
Bottom Frame
Bottom Frame
Clearance Hole
Base Frame Assembly (10)
3
/
8
" Clearance Hole
Base Frame
Assembly (10)
Shorter Legs
Base Frame Assembly (10) Wing
R
EVOLVING
S
HELF
A
SSEMBLY
C
ONTINUED
A
SSEMBLE
B
ASE
F
RAME AND
C
ENTER
C
OLUMN
C
ONTINUED