Wenger Corner Cabinet, Руководство по сборке

Страница: 48 / 52

48
To install the Half Shelf Assembly to the Center Column Assembly, do as follows.
1. Place the Half Shelf Assembly (12) against the Center Column Assembly (11), aligning the
Clearance Holes in the Half Shelf with the Clearance Holes in the Center Column.
2. Insert a Capscrew (4) through a Flat Washer (2) and then through the upper Clearance Hole in the
Half Shelf, until the capscrew threaded end extends from the Center Column.
3. If a second Half Shelf Assembly (12) is to be assembled, align the upper clearance hole to the
threaded end of the Capscrew (4) and push the Shelf against the Center Column.
4. Place a Flat Washer (2) onto the threaded end of the Capscrew (4).
5. Screw a Locknut (5) onto the Capscrew (4).
6. Repeat steps 2, 4, and 5 at the lower clearance hole.
7. Using two
9
/
16
" wrenches or sockets and ratchets, tighten the Capscrews and Locknuts.
8. Install additional Half Shelf Assemblies by repeating steps 1 to 7.
Half Shelf Assembly (12)
Capscrew,
3
/
8
-16 x 3
1
/
4
" long (4)
Locknut,
3
/
8
-16 (5)
Flat Washer (2)
!
CAUTION
Make sure all
weight on shelves
is evenly
distributed.
! CAUTION
Do not place more
than 50 pounds on
a Half Shelf
Assembly.
Clearance Holes
Center Column Assembly (11)
Locknut,
3
/
8
-16 (5)
R
EVOLVING
S
HELF
A
SSEMBLY
C
ONTINUED
A
SSEMBLE A
H
ALF
S
HELF TO THE
C
ENTER
C
OLUMN