Wenger Corner Cabinet, Руководство по сборке

Страница: 37 / 52

37
S
HELF
/H
ANGER
A
SSEMBLY
C
ONTINUED
Shelf (6)
4. To install an upper Shelf (6), do as follows.
a. Place the Shelf (6) on the Shelf Supports (7).
b. Align the three clearance holes in the front Shelf Support (7) with the three pilot holes on the
front bottom side of the Shelf (6).
c. Attach the Shelf (6) to the front Shelf Support (7) with three Pan Head Screws (3) as shown
below.
NOTE: Tighten the screws snugly, but do not over tighten (use care with power screwdrivers).
d. Align the clearance holes in the rear Self Support with the pilot holes on the rear bottom side of
the Shelf and attach with two Pan Head Screws (3).
Clearance Hole
Pan Head
Screw, 1
3
/
4
" (3)
Front Shelf Support (7)
Pilot holes on
bottom of Shelf
Rear Shelf Support (7)
5. To install a bottom Shelf (6), do as follows.
a. Apply five Velcro Strips (9) to the front and rear Shelf Supports (7) as shown below.
b. Remove the paper backing from the five Velcro Strips (9).
c. Place the Shelf (6) onto the Velcro Strips (9) and Shelf Supports (7) and against the cabinet
back panel. The Shelf can be removed if the cabinet needs additional leveling.
Shelf Support (7)
Shelf (6)
Velcro Strip (9)
Pan Head Screw, 1
3
/
4
" (3)
Velcro Strip (9)
Front Edge
F
IXED
S
HELF
A
SSEMBLY
C
ONTINUED