Wen TT1015, Инструкция по эксплуатации

Страница: 14 / 40

INSTALLING THE TABLE EXTENSION
1. Use a Phillips-head screwdriver (not included) to attach
the table extension rods (Fig. 5 - 1) to the table extension
(Fig. 5 - 2) with the M6x10 screws and 6mm washers.
2. Loosen both knobs (Fig. 6 - 1) on the rear side of the
saw and insert the extension rods into the holes. Once the
table extension is in the desired position, tighten the knobs.
To reposition the extension, loosen the knobs, adjust the
extension to the desired position, and tighten the knobs.
3. Insert the R-clips (Fig. 7 - 1) into the holes in the two
rear extension rods to secure the table extension.
ASSEMBLY
1
Fig. 6
1
Fig. 7
Fig. 5
1
2
1
14