Wen TT1015, Инструкция по эксплуатации

Страница: 18 / 40

MITER GAUGE
The miter gauge can be positioned on either side of the
blade, as shown in Fig. 21. To change the angle, loosen
the knob on the gauge (Fig. 22 - 1) and set it to the desired
angle, then tighten the knob.
REAR EXTENSION
When ripping longer workpieces, the rear extension (Fig.
23 - 1) can be extended for extra support. Loosen the two
knobs (Fig. 23 - 2) under the rear extension, and pull the
extension outward. Then, tighten the knobs to secure the
extension.
OPERATION
Fig. 21
Fig. 22
1
Fig. 23
1
2
18