WEMPE digital main clock 20097
Operation
V3.0 01/2011
29
1.1.3 Extension card for analogue clocks
If an extension card for analogue clocks is installed in the unit, set the secondary clock line
as follows:
Two analogue lines are available:
LT: local time secondary clocks
SE: seconds secondary clocks
UT: UTC secondary clocks
f: forwards running
fb: forwards and backwards running
M: minutes (or seconds) impulses
H: ½ minute (½ second) impulses
G: GORGITIME / 24-hour display
Setting of the analogue line:
1. Remove write protection (
1.1.1).
2. Press the key
1
several times until
the following message appears on
the display:
3. Press the
ENTER
key for confirmation. The line number starts flashing.
(The analogue line that needs to be modified, can only be selected once again with the
key
2
if it has not been correctly selected in the main menu).
4. To make the desired settings of the analogue line:
– press the key
3
to set an UT, LT or seconds line,
– press the key
4
to merge two lines to one forwards and backwards running line,
– press the key
5
to set whether the output impulses are to be transmitted every
minute (second) "
M
" or every half-minute (second) "
H
".
Example for a forwards running
secondary clock line (local time) with
minutes impulse:
5. Press the
ENTER
key to confirm the modification.
To cancel the modifications, press the
MENUE
key twice.
6. Press the
MENUE
key to return to the time display.
Содержание 20097
Страница 1: ...Operating Instructions WEMPE digital main clock 20097 ...
Страница 40: ...WEMPE digital main clock 20097 Annex 40 V3 0 01 2011 1 3 Circuit boards 1 1 1 Main board Ill 11 Main board ...
Страница 42: ...WEMPE digital main clock 20097 Annex 42 V3 0 01 2011 1 1 3 Oscillator board Ill 13 Oscillator board ...
Страница 59: ...WEMPE digital main clock 20097 Notice V3 0 01 2011 59 Notice ...
