WEMPE 20097 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 60

WEMPE 20097 Скачать руководство пользователя страница 18

WEMPE digital main clock 20097

Installation and putting into operation

18

V3.0 01/2011

1.1.2 Console mounting

1. Prepare the switchboard cut-out

according to the illustration.

NOTICE!

Size the drill hole diameter for M4
thread screws.

Ill. 5: Switchboard cut-out

2. Insert the main clock from above into the switchboard cut-out.

3. Place M4 thread screws from above into the edges of the main clock and fit them

tightly from the backside of the switchboard with washers and nuts.

4. Make sure that the main clock holds reliably and safely on the console.

1.4 Fitting of cables

1.1.1 Fitting of cables at the wall-mounting version

1. Unscrew both screws of the main clock’s terminal box cover and remove the cover.

2. Pierce a pre-cut hole for the cable

entry from the bottom to the inside.
Clean the cable hole.

NOTICE!

It is also possible to place the cable
entry on the back of the main clock.
For this effect:

a) Dismount the main clock in

reverse order from the wall.
(

1.1.1 Wall mounting).

b) Pierce a pre-cut hole from the

back to the inside.

c) Clean the cable hole. Insert the

cable according to the following
description.

d) Mount the main clock back on the

wall.

Ill. 6a: pre-cut holes on the bottom

Ill. 6b: pre-cut holes on the back

«
...
16
17
18
19
20
...
»

Содержание 20097





























































Отзывы:

Нет отзывов