WEMPE 20097 Скачать руководство пользователя страница 27

Страница: 27 / 60

WEMPE digital main clock 20097

Operation

V3.0 01/2011

1.1.6 Setting of the internal standard interface

The default setting of the baud rate is
4800. The message on the right is

indicated for information purposes:

1.1.7 Programming of relay outputs for error messages

The main clock is fitted with 2 relay outputs that can be programmed for the following error
messages:

Supply:

power supply failure (24 V DC)

Ext. Fuse:  failure of the secondary clock fuse ("SLAVE")
Int. Fuse:  failure of the main fuse ("MAINS")
Low Batt.:  accumulator voltage too low

Programming of the relay outputs for the error messages:

1. Remove the write protection (

1.1.1).

2. Press the key

several times until

one of the two relay setting menus
appears on the display, for example:

3. Press the

ENTER

key for confirmation. The cursor starts flashing.

4. Press the key

to select from among the possible errors.

5. Press the

ENTER

key to confirm the selection.

To cancel the modification, press the

MENUE

key twice.

6. Press the

MENUE

key, to return to the date display.

1.3 Set-up of secondary clocks

1. Press the

MENUE

key for at least 4 s until the version number appears on the display.

2. Press the key

several times until

the analogue time setting menu
appears on the display.

3. Press the

ENTER

key. The following

display appears (for secondary
clocks on the terminals 32 & 33):

For analogue secondary clocks on
the terminals 7 & 8, press

once, until the message on the right
appears on the display:

4. Press the

ENTER

key. The following

display appears:

5. Set all secondary clockss by hand to a standardised time (e.g. 12:00).

Содержание 20097





























































Результаты поиска

Содержание 20097

Отзывы:

Бренды по названию

Популярные бренды

WEMPE 20097, Руководство по эксплуатации

Результаты поиска

Содержание 20097

Отзывы:

Бренды по названию

Популярные бренды