13
Owner’s Manual
WMC-2500
Installa
Ɵ
on Guide
MOVING THE UNIT
Please li and carry more than 2 people. If casters are set to the unit, unlock the casters and
push the unit to a
fl
at, level surface and set the caster brakes to the locked posi on.
PLUGGINGING THE UNIT
Check the prongs and surface of the power cord plug for dust/dirt. If dust and/or dirt are pres-
ent, wipe o
ff
with a clean, dry cloth.
Check the power cord, plug and prongs for damage or excess play.
If any damage or excess play is found, contact a quali
fi
ed repair technician or a quali
fi
ed electri-
cian to perform replacement or repair of the power cord, plug or prongs.
NOTE : Make sure the AC outlet is free of dirt, oil, water or any other foreign material.
WARNING REGARDING PROPER LOCATION FOR INSTALLATION
Do not use the unit in explosive environments or in areas where
fl
ammable
gas leakage may occur.
Do not use the unit in a corrosive atmosphere.
Do not use the unit above 18
˚
C(64.4
˚
F)~45
˚
C(113
˚
F)
Do not install the unit on uneven or sloping surface. The unit may roll or
topple over even if the casters are set to the locked posi on.
If the power cord or plug is damaged, repair should only be performed by
quali
fi
ed electrical personnel.
Do not connect/ disconnect the power cord or a empt to operate bu ons
with wet hands. This could result in electrical shock.
