17
Owner’s Manual
WMC-2500
FILTER CLEANING (With
fl
ange)
1. Loosen up 2 bolts on
fl
ange.
2. Slide
fi
lter up and use vacuum cleaner to remove the dust from the
fi
lter.
3. If the
fi
lter is heavily covered with dust and dirt, warm water and mild soap or neutral deter-
gent may be used to wash the
fi
lter. Do not use any other chemicals to clean
fi
lter, as they will
likely damage the
fi
lter.
4. Dry the
fi
lter in a shaded area before replacing it. Do not operate the unit without the
fi
lter
installed and the
fi
lter frill in the closed posi on.
5. Replace the clean
fi
lter and re-assembly
fl
ange on the unit..
NOTE :
For e
ff
ec ve cooling clean the
fi
lter at least every 2 weeks.
Figure 24 - Removing
condenser Filters
Figure 25 - Removing
evaporator Filters
- For your convenience, record the complete model number and product name (located on the
Product Iden
fi
ca on Plate), the purchase date, purchase loca on, serial number, and warranty
period in the table below.
- Also, a ach your purchase receipt as proof of purchase to this instruc on manual for future
reference.
- To ensure your product is covered by warranty, the complete faulty product along with you
original purchase receipt must be provided at the place of purchase.
Do not operate with out the
fi
lter
fi
ed.
Do not operate the unit with a damaged cord or plug, a er the unit malfunc-
ons or if the unit has been dropped or damaged.
