WELLTECH WellPhone-305, Руководство администратора

Страница: 86 / 89

SIP SIP-Phone Administration Guide
85
5. –priority : set CPU packets priority number.(From 0 to 7, 7 is the highest priority.)
6. –lanpriority : set pc port priority number. (From 0 to 7, 7 is the highest priority.)
7. –landroptag : enable/disable pc port drop tag function. If this function is enabled,
SIP Phone will drop priority tag on packets sending out from PC port.
14. [time] command
When SIP-Phone enables SNTP function and be able to connect with SNTP server,
type time command will show the current time retrieved from SNTP server.
Type time then following figure will be shown.
Current time is FRI APR 01 20:30:12 2005
15. [ping] command
Command ping can test whether the IP address is reachable or not.
Usage: ping “IP address”
The message will display packets transmitting condition or no answer from the IP
address.
usr/config$ ping 10.1.1.3
PING 10.1.1.3: 56 data bytes
64 bytes from 10.1.1.3: icmp_seq=0. time=0. ms
64 bytes from 10.1.1.3: icmp_seq=1. time=0. ms
64 bytes from 10.1.1.3: icmp_seq=2. time=0. ms
64 bytes from 10.1.1.3: icmp_seq=3. time=0. ms
----10.1.1.3 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/0/0
usr/config$ ping 1.1.1.1
PING 1.1.1.1: 56 data bytes
no answer from 1.1.1.1
16. [rom] command
Type rom then following figure will be shown.
ROM files updating commands
Parameters:
-print show all software versions