WELLTECH WellPhone-305, Руководство администратора

Страница: 71 / 89

SIP SIP-Phone Administration Guide
70
Chapter 4 Configuring through Telnet command lines
After setting the IP Address of SIP-Phone and reboot, (please refer to LCD Menu: 5-3.4.5),
user can enter into Telnet command lines.
Note:
1. After user enter SIP-Phone configuration via telnet, please use login: ” root ”,
password : null, press enter to enter command lines. If user forgets password,
please contact with the distributor, we will generate a specific password
according to your MAC address of SIP-Phone. MAC address is on a label at the
bottom of your case in format with “0001a8xxxxxx”.
2. User must input lower-case command, but contents of configurations such as SIP
alias or user name etc, user can set as capital case.
3. After any change of configuration, please remember to do commit command to
save changes and then reboot command to reboot system.
Telnet Commands:
Command Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
help
quit
ifaddr
sip
pbook
sysconf
voice
ddns
digit
pt
tos
vlan
time
ping
rom
passwd
flash
commit
reboot
debug
help/man/? to show all command list
quit/exit/close to exit command line management
Network information and configuration
SIP related configuration
Phone book information and configuration
System function configuration
Voice volume and codec configuration
Dynamic DNS configuration
Digit drop/insert manipulation
RTP payload type.
IP packet DSCP value configuration
Virtual LAN tag configuration
Show current system time
Ping specified host to see network traffic status
Upgrade software version
Set management login password
Reset all configurations back to default values
Save data before reboot
Reboot system
Show debug messages