WELLTECH WellPhone-305, Руководство администратора

Страница: 74 / 89

SIP SIP-Phone Administration Guide
73
Primary/Secondary Proxy Server, DDNS Server, DDNS check IP server, FTP server,
TFTP server and Phone book…etc.
5. –autodns: Specify the way to obtain DNS Server. If user set this value as 0 that
means no matter what network mode SIP-Phone is, user has to specify DNS server
manually. If user set this value as 1 that means SIP-Phone will capture DNS server
from DHCP server or PPPoE server automatically.
( ifaddr –autodns 0/1 , 0 as manually and 1 as auto.)
6. -sntp: When SNTP server is available, user can enable SIP-Phone SNTP function
and assign SNTP server IP address so that SIP-Phone can capture current time
from SNTP server. (ifaddr –sntp 1 “xxx.xxx.xxx.xxx ”)
7. –timezone: User can set different time zone according to the location SIP-Phone is.
For example, in Taiwan the time zone should be set as 8,which means GMT+8.
(GMT-8: ifaddr –timezone -8 )
8. -ipsharing: If SIP-Phone is behind an IP-sharing, user must enable IP sharing
function and specify public IP address. ( ifaddr –ipsharing 0/1 “public IP address
of IP sharing”, 0 for disable and 1 for enable)
9. –stun: Enable/disable STUN function and set STUN server address. After user has
set this function, SIP-Phone can work behind NAT device. ( ifaddr –stun 0/1 “STUN
server address” , 0 is disable and 1 is enable )
10. –stunport: Set STUN server port for inter-working with STUN Server.
Note:
Some Proxy servers support endpoint behind NAT function, in this case
SIP-Phone doesn’t have to enable IP sharing or STUN function, please contact
with your Proxy Server vendor.
11. –pppoeid: to set PPPoE authentication user name.
12. –pppoepwd: to set PPPoE authentication password.
13. –pppoeretry: Choose enable or disable this function. If user enables this function,
after PPPoE disconnected, SIP-Phone will automatically reboot to re-connect, and
after reboot, if SIP-Phone still can’t connect with server, SIP-Phone will keep trying
to connect. On the other hand, if user disables this function, SIP-Phone won’t
reboot and keep trying to connect. ( pppoe –reboot 0/1 )
14. –pppoecho: Enable or Disable PPPoE Echo function. If user enabled this feature,
SIP Phone will send out echo request to check PPPoE connection status. Please
notice that if user disables this function, SIP Phone cannot detect if PPPoE
connection is still alive or not. ( pppoe –echo 0/1 )