WELLTECH WellPhone-305, Руководство администратора

Страница: 79 / 89

SIP SIP-Phone Administration Guide
78
1. -print: display all current configurations.
2. -idtime: set the inter-digit timed out duration (in second) of two pressed digits. If the
duration is timed out and user hasn’t pressed next number, SIP-Phone will dial out
all number pressed.
3. -dtmf: set DTMF type. User can select DTMF type SIP-Phone receive and transmit.
( sysconf –keypad 0/1/2, 0 for in band, 1 for RFC2833, 2 for SIP-Info.)
4. -eod : select end-of-dial key, e.g. set end-of-dial key as “
＊
” button, after finished
pressing dialing number then press “
＊
” will dial out pressed number immediately.
( sysconf –eod 0/1/2 , 0 for no end of dial key , 1 for “
＊
” button, 2 for “ # ” button )
5. –hotline: If user set SIP-Phone as hotline mode, once SIP-phone is off-hook, it will
automatically dials out IP address or phone number set in hotline table.
( sysconf –hotline “IP address of callee” “phone number of callee” ). If user
wants to cancel hotline mode, use command sysconf –hotline x .
8. [voice] command
The voice command is associated with the voice codec setting information.
Type voice then following figure will be shown.
Voice codec setting information and configuration
Parameters:
-print Display voice information and configuration
-priority Priority preference of installed codecs
g729: G.729 codec
g729b: G.729B codec
g723: G.723 codec
g711u: G.711U codec
g711a: G.711A codec
-size Set voice frame sending size
-volume Specify voice volume (0~7, default: 4)
-nscng No sound compression and CNG. (G.723.1 only, On=1, Off=0)
Example:
voice -volume voice 7
voice -priority g729 g723 g711u g711a
1. -print : display voice codec information and configuration.
2. -priority : set codec priority in order. Please notice that user can set from 1 to 5
codecs as need, for example, voice –priority g723 or voice –priority g723 711a
g711u g729 g729b means SIP-Phone can support only one codec up or five