SIP-Phone 302 Administration Guide
SIP-Phone 302 Ver:
39
8. [time] command
When SIP-Phone 302 enable SNTP function and be able to connect with SNTP server,
type
time
command will show the current time retrieved from SNTP server.
9. [ifaddr] command
Configure and display the SIP-Phone 302 IP information.
1.
–print:
print out all current configurations of ifaddr command.
2.
-ip, -mask, -gate:
Set SIP-Phone 302 IP Address, subnet mask and default gateway
respectively.
1.
-ipmode:
Set SIP-Phone network mode to be Fixed IP, DHCP or PPPoE.
When User set IP mode to be fixed IP, please set IP, subnet Mask, default gateway
as mentioned in item 2.
If User set IP mode to be DHCP, SIP-Phone will search for DHCP server to capture
IP address after reboot.
If user set IP mode to be PPPoE, please remember to set related parameters under
[pppoe] command
.
2.
-sntp:
When SNTP server is available, enable SIP-Phone 302 SNTP function and
assign SNTP server IP address so that SIP-Phone can capture current time from
SNTP server.
(ifaddr –sntp 1 “xxx.xxx.xxx.xxx
”)
3.
-dns:
User can set primary and secondary Domain Name Server IP address. Once
SIP-Phone can connect with DNS server, user can specify URL address instead of
IP address for Proxy Server and phone book IP address...etc.
(ifaddr –dns 1
“primary DNS server address
”
–dns 2 “secondary DNS server address
”)
4.
–timezone:
User can set different time zone according to the location SIP-Phone is.
For example, in Taiwan the time zone should be set as 8,which means GMT+8.
(GMT-8:
ifaddr –timezone -8
)
5.
-ipsharing:
If SIP-Phone 302 is behind a IP-sharing , user must enable IP sharing
function and specify public IP address.(
ifaddr –ipsharing 0/1 “public IP address
of IP sharing” ,
0 for disable and 1 for enable)
Note:
Some Proxy servers support endpoint behind NAT function, in this case SIP-Phone
doesn’t have to enable IP sharing function, please contact with your Proxy Server
vendor for detail information.
Содержание SIP-Phone 302
Страница 1: ......