WELLTECH SIP-Phone 302, Руководство пользователя

Страница: 47 / 52

SIP-Phone 302 Administration Guide
SIP-Phone 302 Ver:
46
17. [bureau] command
1. -print : display all current configurations.
2. –hotline : set hotline IP and remote phone number. If user has enable Hotline
function, once SIP-Phone 302 been off-hook, it will automatically dial out to
assigned IP and phone number.
( bureau –hotline “IP of destination” “Phone number of destination” )
Note:
To set SIP-Phone 302 under hotline mode must set following configurations:
1. Peer-to-Peer mode: sip –mode 0
2. Hotline service: sysconf –service 1
18. [rom] command
1. -print : show all current configurations and version information.
2. -app , -boot , -dsptest , -dspcore , -dspapp ,: upgrade main boot code, main
application code, DSP testing code, DSP kernel code, DSP application code, Ring
Back Tone PCM file and Hold Tone .
Note:
After upgrade Application, please remember to execute flash –clean command,
which will clean all configurations become factory values except IP address.