SIP-Phone 302 Administration Guide
SIP-Phone 302 Ver:
10
Chapter 2 Configuring the SIP-Phone 302 through LCD Phone
menu
Note:
1. Items marked with (**): May be not available yet, please contact with your distributor.
2. After any configuration has changed for the SIP-Phone 302, user has to do
Reboot
in
the selection 7 “Reboot”.
3. We suggest user to set IP address via LCD menu 5
→
2.3.4.5 first, then go to
chapter 3 to do other configurations via web browser. If user need to do more
detail or advanced configurations, please refer to chapter 4 and use Telnet
command lines.
4. User can also try to enter web configuration via default IP address of SIP-Phone 302:
10.1.1.3
1. Initialize SIP-Phone 302
1. After SIP-Phone 302 finish initializing, it will get into standby mode:
The main LCD screen would be shown as similar as above. “
Proxy
” means the
SIP-Phone 302 is in Proxy Mode.
Note:
If SIP-Phone didn’t register to Proxy server, when SIP-Phone 302 been off-hook, user
will hear busy tone instead of dial tone, also system LED indication will be blinking.
2. When SIP-Phone 302 is under peer-to-peer mode, on LCD will show “
P2P
” instead
of “
Proxy
”.
SIP-Phone
Proxy
SIP-Phone
P2P
Содержание SIP-Phone 302
Страница 1: ......