Wellspa WELLS-LOU4-PRE, Руководство пользователя

Страница: 5 / 12

5
2. CONTROL PANEL WITH spaTouch™ MENU
Navigation in the menu
All navigation in the menu structure is performed by touching the screen. If the text in the main menu is displayed in
white, it can be pressed. The menu options in the right edge of the screen can also be pressed. Press one of them to
navigate to another menu, which includes more options.
Most menu displays return to the main display if no items are pushed within 30 seconds.
102 °F
Set: 104 °F
8:32 PM
Ozone
Filter 1
Ready in Rest Mode
Heating
High Range
Spa
Scenes
Settings
The only option that can be changed in the left side of the main display is the preset temperature. Touch the preset
temperature line or water temperature option to navigate to the preset temperature menu. See the next page.
Note: the screen automatically switches to standby mode after 30 minutes, and then it switches off. This is normal. Touch
any point of the screen to use the panel.
SPA MENU
Access to all devices
The spa menu shows all devices that can be controlled; it also displays other properties such as switching to another
panel. The menu includes icons concerning the devices that have been installed on the particular spa model. This
means that the menu may differ depending on the devices installed.
These icon buttons can be used to select and control individual devices.
Some devices, like pumps, may have several on-modes (ON), which is why the icon changes to display the current
mode of the device. Below are some examples of the displays of a two-speed pump.
Jets Off (the jets have been switched
off)
Jets Low (the jets work at low power)
Jets High (the jets work at high power)
If the spa has a circulation pump, an icon that displays the operation of the circulation pump appears, but the
circulation pump cannot be directly controlled outside the pump’s pre-filling mode.
NOTE: if the water heater (heating element) is on, the middle part of the icon indicating the pump (Circ or P1 Low)