Wellcraft 180 SPORTSMAN O/B, Руководство пользователя, Страница: 167 / 180

• Clean the bilge area.
• Inspect all exhaust connections for carbon
monoxide leakage. Adjust and repair as
required.
• Test the na vigational lights and all other
lighting on board.
• Inspect all wiring for fra ying, wear, loose con-
nections and other damage.
• Inspect all switches, controls and other
related equipment for proper operation.
• Inspect all safety equipment for proper oper-
ation and ph ysical condition.
• Open all faucets and fill freshw ater holding
tank with water. Turn freshwater pump on to
allow water to flow through faucets until all
antifreeze is flushed out and the w ater runs
clear, then close faucets. F ill the freshw ater
tank until full, then check the entire system
for water leaks.
• Launch the boat and star t the engine. It ma y
take a minute of cranking to allow the fuel
system to prime. When the engine star ts,
keep a close w atch over the gauge readings
and check for leakage and abnor mal noises.
Keep speeds low until the engine has
reached normal operating temperature. If
your engine w as fogged for winterization,
you will see exhaust smok e for a fe w min-
utes while the fogging oil is bur ned off.
Refer to engine and boat accessor y manuals for
further recommissioning instr uctions.
8-5
60305-Fishboat-08_09_10_sect 1/13/04 3:35 PM Page 8-5