16
SMP Encoder & Transcoder Quick Installation Guide
V1.0-N
a) Board1~4 represents the corresponding slots of the equipment. If the slot is
inserted with a card module, the corresponding Board No. will be displayed
on the “Input Program Configuration” window, and the name of the inserted
module will be displayed after the Board No.
b) For empty slot, no Board No. will be displayed.
c) Port No.: represents each physical port of the inserted module.
d) Scan the input TS: after the parameters of the inserted module are properly
configured, select one port which is connected with input stream, and then
click the mouse right button and select “Scan TS” menu. All the input stream
of that port will be scanned and displayed.
Scan
the
port
that
is
fed
with
input
stream
