13
SMP Encoder & Transcoder Quick Installation Guide
V1.0-N
FEC Parameter
The bigger values it is, the stronger capabilities it has to correct
the data mistakes. But the FECL and FECD should be less than
100.
IP module-Output
The “Output” setting menu is to set the IP output function for transmitting multicast/unicast
IP stream.
Pic-2.3-3
Following are the key parameters that need to change to meet with the application need in
first time setup:
Parameters Description
ChannelSelect
In this ‘ChannelSelect’, user can select a channel to
configure its transmitting parameters.
Enable
On: enable the IP transmission function.
Off: disable the IP transmission function.
Note: this parameter setting applies to all channels.
Channel configuration
EnableChannel
Enable or disable corresponding output channel
SourcePort
Set port of multicast/unicast
