10
SMP Encoder & Transcoder Quick Installation Guide
V1.0-N
Pic-2.3-1
For encoding module quick setup, following are the key parameters that need to change
to meet with the application need:
Parameters
Description
Channel
Select a channel to configure its parameters.
Settings work separately for each channel. The
whole page setup will take effect only to the
corresponding channel.
Video Source
To select the correct video input source.
Audio Source
To select the correct audio input source.
Encode Mode
Select CBR or VBR for the encoding mode.
Video Max Encode Rate To set the Max encode rate for VBR mode.
Video Min Encode Rate
To set the Min encode rate for VBR mode.
Note: the min encode rate must be smaller than the
max encode rate.
Video Encode Rate
To set the encode rate for both VBR mode and VBR
mode. The range is 2000 ~ 15000 Kbps.
Note: The
values of the video encode rate should be between