12
SMP Encoder & Transcoder Quick Installation Guide
V1.0-N
Pic-2.3-2
Parameters Description
ChannelSelect
In this ‘ChannelSelect’, user can select a channel to configure its
parameters.
Enable
On: enable the IP receiving function.
Off: disable the IP receiving function.
Note: this parameter setting applies to all channels.
Channel configuration
EnableChannel
Enable or disable corresponding input channel
SourceIPAddress
Set the IP address of the multicast/unicast that are going to
receive
SourcePort
Set port of multicast/unicast
Protocol
Select UDP/RTP for multicast/unicast
ColPortMatching
If the output IP stream quality looks not as good as the input
stream, user can select to ‘Enable’ these two options then to
enable the FEC function.
RowPortMatching
