WELDPRO MIG155GD Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 36

WELDPRO MIG155GD Скачать руководство пользователя страница 18

PRODUCT DESCRIPTION

This welding machine is equipped with the world’s most advanced inverter technology.

The inverter’s working principle is that the 60Hz power line frequency is transformed to direct current and inverted to a high
frequency using a high power IGBT device. After that, a voltage drop is generated and it is transformed to a to high-current DC
using the Pulse Width Modulation (PWM) technology. Using the power inverter technology, the volume and the weight is
substantially reduced and the conversion efﬁciency is increased by 30%.

The MIG155GD is a self-shielding welding machine that can be used for MIG as well as for ﬂux-cored arc welding. It is equipped
with  a  unique  electrical  reactor,  which  can  precisely  control  the  short-circuit  transfer  and  mixed  transfer  modes,  this  way  it
shows  better  performance  than  other  machines.  Compared  with  welding  machines  using  silicone  controlled  rectiﬁer  and  hot
tapping,  our  products  have  the  following  advantages:  stable  wire  feed  rate,  portable,  energy  saving,  free  of  electromagnetic
noise. Besides, our products spatter less, easier arc starting, deep welding pool, high duty cycle, etc.

This machine features a design which has the following advantages: high efﬁciency, power saving, etc. It is especially suitable
for private users who wish to work with different metals using different techniques.

Thank you for choosing our product. Please feel free to share your valuable suggestions with us; we are continuously working
on improving our products and services.

WARNING

The machine is mainly used for industrial purposes. It causes radio interference when used
indoor. Users must take preventative measures.

17

PRODUCT DESCRIPTION

«
...
16
17
18
19
20
...
»

Содержание MIG155GD





































Отзывы:

Нет отзывов