WELDPRO MIG155GD, Руководство оператора, Страница: 12 / 36

Electric shock from torch or wiring can kill.
Wear dry insulating gloves. Do not wear wet or damaged gloves. Do not touch live
electrical parts.
Do not use worn, damaged, undersized, or repaired cables.
Protect yourself from electric shock by insulating yourself from work and ground. Use
non-flammable, dry insulating material if possible, or use dry rubber mats, dry wood or
plywood, or other dry insulating material big enough to cover your full area of contact with
the work or ground. Watch for fire, smoke, and sparks.
Disconnect input plug or power before working on machine. Do not make input
connections if color blind.
Frequently inspect input power cord and ground conductor for damage or bare wiring –
replace immediately if damaged – bare wiring can kill. Keep cords dry, free of oil and
grease, and protected from hot metal and sparks. Be sure input ground wire is properly
connected to a ground terminal in disconnect box or receptacle.
Properly install, ground, and operate this equipment according to its Owner's Manual and
national, state, and local codes.
Breathing cutting fumes can be hazardous to your health.
Keep your head out of the fumes. Do not breathe the fumes. Use enough ventilation,
exhaust at the arc, or both, to keep fumes and gases from your breathing zone and the
general area. The recommended way to determine adequate ventilation is to sample for the
composition and quantity of fumes and gases to which personnel are exposed.
Read and understand the Safety Data Sheets (SDSs) and the manufacturer's instructions
for adhesives, coatings, cleaners, consumables, coolants, degreasers, fluxes, and metals.
Use enough forced ventilation or local exhaust (forced suction) at the arc to remove the
fumes from your breathing area.
11