WELDPRO MIG155GD, Руководство оператора, Страница: 15 / 36

Electric and magnetic fields (EMF) can affect Implanted Medical Devices.
Wearers of Pacemakers and other Implanted Medical Devices should keep away.
Implanted Medical Device wearers should consult their doctor and the device manufacturer before going near arc welding, spot
welding, gouging, plasma arc cutting, or induction heating operations.
Hot parts can burn.
Do not touch hot welded or cut parts with bare hand. If handling is needed, use proper tools and/or wear heavy, insulated
welding gloves to prevent burns.
Allow cooling period before handling parts or working on equipment.
Falling equipment can injure, and damage equipment.
Use lifting eye to lift unit only, NOT running gear, gas cylinders, trailer, or any other accessories. Use correct procedures and
equipment of adequate capacity to lift and support unit.
If using lift forks to move unit, be sure forks are long enough to extend beyond opposite side of unit.
Do not place unit where it can easily tip over or fall.
Battery charging output and battery explosion can injure.
Sparks can cause battery gases to explode.
Do not smoke and keep matches and flames away from battery.
Wear a face shield or safety glasses when working near or on a battery.
Do not use welder or plasma cutter to charge batteries or jump start vehicles unless the unit has a battery charging feature
designed for this purpose.
5. EMF Information
Electric current flowing through any conductor causes localized electric and magnetic fields (EMF). The current from arc
welding (and allied processes including spot welding, gouging, plasma arc cutting, and induction heating operations) creates an
EMF field around the welding circuit. EMF fields can interfere with some medical implants, e.g. pacemakers. Protective
14