Welby 96373, Руководство пользователя

Страница: 19 / 129

Safety
19
− The adhesive electrodes may be connected to
or disconnected from the device using the sock-
ets and the electric lead wire.
− Every person responds differently to electrical
nerve stimulation. If the treatment is unsuc-
cessful, consult your physician. Please remove
the protective film prior to attaching the adhe-
sive electrodes. The adhesive strength of the
electrodes depends on the characteristics of the
skin, storage, and number of times they have
been used. If the full surface of the adhesive
electrodes no longer adheres to the surface of
the skin, they need to be replaced with new
adhesive electrodes. The entire surface of the
adhesive electrodes must be in contact with the
skin in order to avoid a high local current den-
sity, which can lead to burning of the skin. After
use, reattach the adhesive electrodes to the
protective film and keep them in the polybag to
prevent them from drying out. This maintains
their ability to adhere.
− Avoid touching the adhesive electrodes during
use, as this can cause a short-circuit under
some circumstances, resulting in an excessive
current density. This excessive current density
can lead to burning and injury!