2. Safety
104781 - MRF-2 | MRH-2 - V2.4 - 22.07.2020
Page 11
2. Safety
2.1 General Information
The plant engineering company must prepare operating instructions
for the operator, taking account of the controller's parameters as
supplied.
We recommend referring only to the parameters which the end user
needs for safe operation.
In preparing the operating instructions for the end user, especially the
chapter on “Safety”, account must be taken of local regulations.
IMPORTANT
The parameter settings of the MRF-2 | MRH-2 as supplied do not cor-
respond to the intended use (e.g. compressor output is pulsed).
This can lead to undefined behaviour by individual components when
the system is commissioned.
For this reason, no actuators should be connected when starting ope-
ration. Load circuits should be separated.
The general principle is that the plant constructor is responsible for
putting the controller into operation.
WARNING
NOTICE
