5. Operating
Page 18
106082
– MRF-M2 -E - V0.7 - 23.04.2021
5.2 The configuration software KONSOFT
The user-friendly configuration
software “KONSOFT" can be used for
- Configuration and parameter setting
- visualize the temperature profile for the last 48 hours
- updating (firmware)
Configuration
All setting parameters can be entered and stored, with reference to levels, on your
PC using a clearly designed template. A description is available for every parameter.
Once all parameters are entered, the complete configuration can be transferred to
the control unit via USB interface
Visualisation
Also by USB transfer, temperature profile over the last 48 hours can be obtained
from the regulator, displayed on screen graphically or in tabular form, and stored.
This allows rapid analysis in the event of a fault.
Bootloader function
This allows the controller to be updated to the new operating software at the push of
a button.
NOTE: The KONSOFT PC-Software has been thoroughly tested and has proven itself hundreds of times in customer
use. Despite all care, we point out that the use of the free PC-Software is at your own risk. WELBA does not accept any
liability for damages or loss of data resulting from the installation or use of the Software.
For software
description see
separate instructions
NOTICE
