5. Operating
106082
– MRF-M2 -E - V0.7 - 23.04.2021
Page 23
to section 5.5.2: Explanation of the operating modes
Agitating in cooling mode
=
INTERMEDIATE STIRRING
only during the breaks in cooling mode, and
if parameter [P22 = 1]:
In cooling mode, briefly press the AGITATOR button:
"Sho" appears in the display. If the button is released now, a
“brief intermediate
agitating” is triggered. [Duration = c23]
If the “AGITATING” button is held down for a longer period of time:
The display changes from "Sho" to "Lon". A "long intermediate agitating" is
triggered. [Duration = c24]
if parameter [P22 = 2]:
If
‚toggling‘ is parametrized:
-
Press the “AGITATOR” button in cooling mode - switch on the agitator.
- Press the "AGITATOR" button again - switch off the agitator again.
5.5.3 Continuous stirring mode
if parameter
[c25] = ‘0’
Press the “AGITATOR” button:
(from OFF mode)
Switches on continuous stirring mode (revolving bar in the display).
Press “OFF” button:
Switches off continuous stirring mode.
if parameter
[c25] > ‘0’
Press the “AGITATOR” button: (from OFF mode)
If parameter [c25] is set higher than '0', when the button is pressed the agitator
runs for the set number of minutes.
Press “OFF” button:
Switches off continuous stirring mode prematurely.
