Pick-O-Mat • PM1100 / PM1500 • R02-2014
37/44
Maintenance
9.5 Repair
9
9.4.4
Vertical guide, handling module
L
The vertical guide of a handling module can be adjusted to improve mobility.
1. Remove the fixing nut.
2. Loosen the fastening screws.
3. Loosen the counternut of the setting screws.
4. Using the setting screws, set the vertical guide so that it is backlash-free.
`
Keep the contact pressure as minimal as possible.
5. Tighten the counternut of the setting screws.
6. Tighten fastening screws.
Fig. 18: Adjusting the vertical guide
(1) Fixing nut
(2) Two fastening screws
(3) Counternuts
(4) Setting screws
L
Retrofitting the lift position at the vertical axis from the bottom position (see Figure 18 on
page 37) to the top position only after consultation with WEISS GmbH.
9.5
Repair
The operator should not perform any maintenance or repair work on the machine.
Should maintenance or repair work become necessary, the customer service of WEISS
GmbH is to be contacted.
2
1
4
3
