© 2022 WEINZIERL ENGINEERING GmbH
Seite 17/22
Manual control on the device
This parameter is used to configure manual operation on the device. The manual operation mode
can be blocked or activated (with or without time limit). The time limit defines the duration until the
automatic return from manual operation back to the normal operating mode.
The following configuration options are available:
Disabled
Enabled with time limit 1 min
Enabled with time limit 10 min
Enabled with time limit 30 min
Enabled without time limit
The activated manual operation can reduce the security of the installation.
6.7 Routing TP->RF
Group telegrams
The following settings are possible:
Block
No group telegram is forwarded to the RF line.
Route
All group telegrams are forwarded to the RF line regardless of the filter table.
Filter
The filter table is used to decide whether the received group telegram is to be forwarded to
the RF line.
The setting
“Route” should only be used for test purposes.
