© 2022 WEINZIERL ENGINEERING GmbH
Seite 6/22
3 Reset to factory default settings
It is possible to reset the device to its factory default settings.
Disconnect the KNX bus connector
❸
from the device.
Press the KNX programming button
❶
and keep it pressed down.
Reconnect the KNX bus connector
❸
to the device.
Keep the KNX programming button
❶
pressed for at least another 6 seconds.
A short flashing of all LEDs (
❷❹❺
) visualizes the successful reset of the device to
factory default settings.
3.1 Factory default settings
In the factory default settings, the device has the physical address 15.15.0. Also, KNX Data
Security is disabled and the initial key (FDSK) must be used for secure commissioning.
Routing TP->RF
Group telegrams: Filter
Individual addressed telegrams: Filter
Routing RF->TP
Group telegrams: Filter
Individual addressed telegrams: Filter
4 Wiring scheme
