![background image](http://html.mh-extra.com/html/shinko/cmc-001/cmc-001_instruction-manual_1258163001.webp)
20
40
500
80
3000
3-1.25-YASS3.5
USB plug
75
40
500
80
3000
3-AI0.25-8YE
75
Instruction Manual
USB COMMUNICATION CABLE
CMC-001
No. CMCJE4 2021.05
This manual contains instructions for functions and usage of the USB
communication cable (CMC-001). To ensure safe and correct use, thoroughly read
and understand this manual before using this cable. To prevent accidents arising
from the misuse of this cable, please ensure the operator receives this manual.
Safety Precautions
Caution
Safety Precautions
(
1) Do not confuse the direction of the USB plug when connecting this
cable to the USB port. If the plug cannot be inserted smoothly, do not force
it to enter. This may damage the plug or port.
(2) Do not bend or pull forcibly or put any heavy object on the cable.
(3) Do not connect or remove this cable during communication.
This may cause damage or malfunction.
(4) Do not allow the metallic section of this cable to come into contact with
external power terminals.
(5) Do not handle the cable plug with wet hands. This may result in electric shock.
Precautions
Caution
(1) Ensure the cable is used under the following conditions:
• A minimum of dust, and an absence of corrosive gases
• No flammable, explosive gases
• No mechanical vibrations or shocks
• No exposure to direct sunlight, an ambient temperature of 0 to 50 (32 to
122 ) that does not change rapidly, and no icing
• An ambient non-condensing humidity of 35 to 85%RH
• No large capacity electromagnetic switches or cables through which large
current is flowing
• No water, oil, chemicals or where the vapors of these substances can
come into direct contact with the cable
• Ambient temperature of this cable must not exceed 50 (122 ) if mounted
within the control panel.
(2) It sometimes takes time for the PC to identify the cable when the USB
plug of this cable is connected to the PC. However, this is not a malfunction.
Be sure to confirm the COM port number before starting communication.
(3) Do not extend this cable using an extension cable when connecting to the
PC. A malfunction may occur.
(4) Use a soft, dry cloth when cleaning this cable.
(Alcohol based substances may deface or tarnish the cable.)
1. Model
1.1
Model
CMC-001
-
Controller side
connector
1 Y-type terminal
2 Ferrules
3 Modular connector RJ-11
4 Modular connector RJ-45
1.2 How to Read the Model Label
The model label is attached to the case.
(Fig. 1.2-1)
2. Plug Types and Dimensions
(Scale: mm)
CMC-001-1
(Fig. 2-1)
CMC-001-2
(Fig. 2-2)
CMC-001-3
(Fig. 2-3)
CMC-001-4
(Fig. 2-4)
3. Pin Arrangement
CMC-001-3
CMC-001-4
Pin No.
Pin No.
1
COM
1
-
2
-
2
COM
3
YB(+)
3
-
4
YA(-)
4
YA(-)
5
-
5
YB(+)
6
COM
6
-
7
COM
8
-
4. Usage
(1) Turn the power supply to the PC ON, and start Windows
.
(2) Connect the cable.
Check that the power supply to the instrument is turned OFF.
Connect the USB port of the PC to the instrument, using this cable.
Connection example of CMC-001-1
(Fig. 3-1)
Model
Cable length
Serial number
Indicates procedures which may lead to
dangerous conditions and cause superficial to
medium injury or physical damage or may degrade
or damage the product, if not carried out properly.
(Be sure to read these precautions before
using this cable.)
40
500
80
3000
Modular connector TM20P-66P
40
500
80
3000
Modular connector RJ-45
USB communication cable
CMC-001-1 (Sold separately)
YA(-)
YB(+)
COM
16 YA(-)
17 YB(+)
18 SG
16 YA(-)
17 YB(+)
18 SG
16 YA(-)
17 YB(+)
18 SG
Shielded wire
Shielded wire
Host computer
USB port
BCS2
(Max. 31 units
)
和文は裏面をご覧ください。