Weinmann BiLevel-ST VENTImotion WM 24800, Инструкции по обслуживанию и ремонту

Страница: 35 / 64

Repairguide for VENTImotion/VENTIlogic 35
14. Insert the rechargeable battery connecting
cable into the groove on the power board.
Caution!
Be absolutely sure that the power board/mains
supply unit connecting cable 45 is between the
head of the screw and the box as well as in the
groove of the power board. Ensure that the re-
chargeable battery cable is in the groove. Other-
wise the cable may be trapped and damaged
when the device is closed.
15. Close the device (see "7.3 Close the device"
on page 32).
16. Test the device (see "4. Test the device" on
page 13).
7.6 Replace box and filter holder
Tools and equipment required
• ESD protected work-station
• 3 mm Allen key
1. Open the device (see "7.2 Open device" on
page 31).
2. Remove the power board (see "7.5 Replace
power board" on page 34).
3. Remove the mains supply unit (see "7.4 Re-
place mains supply unit" on page 33).
4. Release the pressure-side hose
74
(connection
to device outlet) from the box.
5. Lift box
58
and filter holder
37
out of the top
part of the housing together.
6. Disconnect the box and the filter holder from
one another by undoing the intake-side hose
73
from both parts.
74
58
37
73
58
37