22/09/2021
WEIDOS Quick Start Guide
Version: 00.00.01
Page 20 / 52
Power Supply schematic:
The standard, Part 1 of IEC 61010, sets the general safety requirements for the following types of electrical
devices and their accessories, regardless of where use of the device is intended. The equipment must be
powered from an external power source in accordance with IEC 61010-1, whose output is MBTS and is limited
in power according to section 9.4 of IEC 61010-1.
3.8
Reset Button
Located at the top cover of Weidos device.
It allows the internal logic to restart the program, to execute the set up again and to start the main loop of
the program again. The data that is stored on the microSD card will be maintained without losing any
information already stored, while the operations that have been left in the middle of execution will start
again from the beginning of the program, losing the temporary values.
CAUTION
Risk of injury!
Once the equipment is installed inside an electrical cabinet, the MTBS cables of the equipment must
be separated from the dangerous voltage cables.
