22/09/2021
WEIDOS Quick Start Guide
Version: 00.00.01
Page 5 / 52
Disclaimers
Weights and Dimensions
Dimensions and weights are nominal, and they are not used for manufacturing purposes, even when
tolerances are shown.
Performance Data
The performance data given in this manual is provided as a guide for the user in determining suitability and
does not constitute a warranty. It may represent the result of manufacturer
’s test conditions, and the users
most correlate it to actual application requirements. Actual performance is subject to the manufacturer
Warranty and Limitations of Liability.
Errors and Omissions
The information in this document has been carefully checked and is believed to be accurate; however, no
responsibility is assumed for clerical, typographical, or proofreading errors, or omissions.
The control and drive components of the devices are approved for industrial and commercial use in industrial
line supplies. Their use in public line supplies requires a different configuration and/or additional measures.
These components may only be operated in closed housings or in higher-level control cabinets with
protective covers that are closed, and when all of the protective devices are used. These components may
only be handled by qualified and trained technical personnel who are knowledgeable and observe all of the
safety information and instructions on the components and in the associated technical user documentation.
When carrying out a risk assessment of a machine in accordance with the EU Machinery Directive, the
machine manufacturer must consider the following residual risks associated with the control and drive
components of a PDS.
1. Unintentional movements of driven machine components during commissioning, operation, maintenance,
and repairs caused by, for example: − Hardware defects and/or software errors in the sensors, controllers,
act
uators, and connection technology − Response times of the controller and drive − Operating and/or
ambient conditions not within the scope of the specification − Condensation / conductive contamination −
Parameterization, programming, cabling, and installat
ion errors − Use of radio devices / cellular phones in
the immediate vicinity of the controller − External influences / damage.
2. Exceptional temperatures as well as emissions of noise, particles, or gas caused by, for example: −
Component malfunctions −
Software errors − Operating and/or ambient conditions not within the scope of
the specification − External influences / damage.
3. Hazardous shock voltages caused by, for example: − Component malfunctions − Influence of electrostatic
charging − Induction of voltages in moving motors − Operating and/or ambient conditions not within the
scope of the specification − Condensation / conductive contamination − External influences / damage
4. Electrical, magnetic, and electromagnetic fields generated in operation that can pose a risk to people with
a pacemaker, implants, or metal replacement joints, etc. if they are too close.
5. Release of environmental pollutants or emissions as a result of improper operation of the system and/or
failure to dispose of components safely and correctly.
