22/09/2021
WEIDOS Quick Start Guide
Version: 00.00.01
Page 16 / 52
3.4
Connector type
Weidos Controllers are equipped
with “PUSH IN” connector
system. This technology allows for fine-wired
conductors with crimped wire-end ferrules or ultrasonically welded conductors, each with a maximum cross-
section of 1.5 mm² (AWG24
–
AWG14), to be inserted easily through the opening in the clamping terminal
without having to use tools. To insert fine-wired conductors without wire-end ferrules, the pusher must be
pressed in with a screwdriver.
Connector’s
type:
Voltage Signals
0-10 V DC (Analog)
24 V DC (Digital & Supply)
Serial Communications
RS485 / UART
SPI & I2C
Multi Function Pins
Direct to uController
3,3 VDC / 5 VDC
Connectors General Specifications:
Connectors PG
1.5 mm with four conductor connections
Max. Ampacity
10 A
Poles
4-pole
3.5
Device Overview
In this section we can see a general overview of Weidos device:
Right side:
