User Manual Managed Switches
150
3.12.3.2 ACL Rate Limiter Configuration
This option is used to define the Rate Limiters ID (from 1 to 16) that are used in the ACLs of the
switch.
For each Rate Limited ID (1 to 16) it has be configured the maximum data rate.
Rate
Setting
Description
Factory
Default
Maximum rate
The valid rate is 0-3276700 in pps
or 0, 100, 200, 300, ..., 1000000 in kbps.
15
Unit
Setting
Description
Factory
Default
pps / kbps
Packets per second (pps) or Kilobits per second
(kbps).
pps
3.12.3.3 ACL Configuration
This page shows the Access Control List (ACL), made up of the Access Control Entries (ACEs)
defined on this switch. Each row describes the ACE that is defined. The maximum number of ACEs
is 256 on each switch. Click on the lowest plus sign to add a new ACE to the list. The reserved ACEs
used for internal protocol (ex: Device bindin
g, Port mirroring, …), cannot be edited or deleted, the
order sequence cannot be changed and the priority is highest.
The information displayed on the page is summarized in the following table:
