User Manual Managed Switches
115
3.10.6 Queue Policing
This page allows the user to configure Queue Policer settings for all switch ports.
Enable
Setting
Description
Factory
Default
Check /
Uncheck
Check to enable the queue policer on the switch port.
Unchecked
Rate
Setting
Description
Factory
Default
Numerical value
Configures the rate for the queue policer. This value
is restricted to 100-3276700 when "Unit" is kbps,
and 1-3276 when "Unit" is Mbps. The rate is
internally rounded up to the nearest value supported
by the queue policer.
This field is only shown if the queue policer is
enabled.
500
Unit
Setting
Description
Factory
Default
kbps / Mbps
Controls the unit of measure for the queue policer
rate as kbps or Mbps.
This field is only shown if the queue policer is
enabled.
kbps
3.10.7 Port Scheduler
This page provides an overview of QoS Egress Port Schedulers for all switch ports.
The following information of each port is displayed on the page:
Mode
Shows the scheduling mode (Strict Priority or Weighted).
Weight Q0
– Q5
Shows the weight for this queue and port.