14
14. Slide a Bumper (40) onto each Weight
Guide (31).
Orient a Weight (30) so that the pin hole is in
the indicated location. Slide the Weight onto the
Weight Guides (31). Then, route the end of the
Burn Cable (45) upward through the center of
the Weight.
Repeat these actions with the other eleven
Weights (not shown).
14
31
30
Pin Hole
40
45
15
15. Orient the Top Cover (27) and the Top Frame
(6) as shown. Slide the Top Cover onto the Top
Frame.
27
6
16. Attach the Top Frame (6) to the Upright (5) with
two M10 x 93mm Bolts (63), two M10 Washers
(88), and two M10 Locknuts (74).
Do not fully
tighten the Locknuts yet.
16
5
63
63
88
74
6
Содержание 831.14923.1
Страница 40: ...40 NOTES...