8
2.
Identify the Rear Uprights (43), which are shorter
than the Front Uprights (not shown). Attach a
Rear Upright to the Left Base (40) with two M10 x
78mm Bolts (32) and two M10 Nylon Locknuts
(34). Make sure that the holes are on the side
shown. Do not tighten the Nylon Locknuts yet.
Repeat this step with the other Rear Upright
(43) and the Right Base (38).
3.
Orient the Left Front Upright (44) so that the
adjustment holes are facing the left Rear Upright
(43) and the numbers are on the inward-facing
side. Attach the Left Front Upright to the Left
Base (40) with four M10 x 78mm Bolts (32), two
Rack Joint Plates (85), and two M10 Nylon
Locknuts (34). Do not tighten the Nylon
Locknuts yet.
Attach the Right Front Upright (not shown) to
the Right Base (38) in the same way.
2
3
43
43
Holes
40
34
32
38
43
44
Numbers
Adjustment
Holes
32
32
85
85
40
38
34
34
