13
15. Press two Plastic Butterfly Bushings (79) and two
Metal Butterfly Bushings (93) into the Right
Butterfly Arm (56). Wet the bottom of the Right
Butterfly Arm with soapy water and slide a
Butterfly Foam Pad (66) onto the Right Butterfly
Arm.
Apply some of the included grease to a 1/2" x
78mm Bolt (97) and to the Plastic Butterfly
Bushings (79). Attach the Right Butterfly Arm (56)
to the Butterfly Bracket (55) with the Bolt and a
1/2" Nylon Locknut (94). Cover the Bolt and the
Nylon Locknut with two Butterfly Caps (80). Do
not overtighten the Nylon Locknut; the Right
Butterfly Arm must pivot easily.
Repeat this step with the Left Butterfly Arm
(57).
16. Attach the Butterfly Backrest (101) to the Center
Upright (45) with two M6 x 75mm Screws (96)
and two M6 Washers (78).
15
79
Grease
Grease
80
97
94
80
55
56
93
93
57
79
66
16
101
78
96
78
96
45
17. IMPORTANT: See the CABLE DIAGRAM on
page 25 to identify the cables as you assem-
ble them.
Identify the Medium Cable (69). Route the
Cable up through the Weight Guide Top Frame
(49) and over a Pulley (87). Attach the Pulley
inside the Top Frame with an M10 x 75mm Bolt
(92), two M10 Washers (35), two 17mm Spacers
(89), and an M10 Nylon Locknut (34).
17
49
69
89
35
35
34
92
89
87
