19
38. Attach the Seat (10) to the Bench Frame (1) with
four M6 x 16mm Screws (29).
39. Attach the Weight Tube (76) to the Leg Lever (5)
with an M8 x 58mm Bolt (75), two M8 Washers
(60), the 10mm Spacer (21), and an M8 Nylon
Locknut (17).
Press the 25mm Angled Outer Cap (61) onto the
indicated end of the Weight Tube (76).
38
10
29
29
1
39
5
61
60
76
75
21
60
17
37. Insert the Backrest Bracket (16) into the slot in
the Bench Frame (1).
Attach the Backrest Frames (6) to the Bench
Frame (1) with an M10 x 156mm Bolt (100), two
M10 Washers (35), and an M10 Nylon Locknut
(34). Do not overtighten the Nylon Locknut;
the Bracket Frames must be able to pivot eas-
ily.
See the inset drawing. Insert the Bench Pin (23)
into the Bench Frame (1) and one of the adjust-
ment holes in the Backrest Bracket (16).
See steps 32 to 35. Tighten the M10 Nylon
Locknuts (34).
35
23
35
6
16
16
1
1
100
34
37
