A
B
78
78
11
11
27
27
29
94
7
ADJUSTING THE SEAT
To adjust the height of the Seat (30), loosen the
“T”-handle (59) and pull it out as far as it will go.
Move the Seat to the desired height and reengage
the “T”-handle into the Seat Post (27). Fully tighten
the “T”-handle.
30
ATTACHING THE CURL PAD
To use the Curl Pad (29), first engage the leg lever
lock (see USING THE LEG LEVER LOCK on the pre-
vious page.) Slide the Curl Post (not shown) onto the
Leg Lever (7). Tighten the Curl Post “T”-handle (94)
into the Curl Post and the Leg Lever.
10
12
11
78
78
CONVERTING THE BUTTERFLY ARMS
To use the Butterfly Arms (11, 12) as fly arms, insert
the Butterfly Pins (78) into the inner holes in the
Butterfly Frame (10) (see inset drawing A).
To use the Butterfly Arms (11, 12) as press arms,
insert the Butterfly Pins (78) into the outer holes in the
Butterfly Frame (10) and the tabs on the Butterfly
Arms (see inset drawing B).
Make sure that the Butterfly Pins (78) are fully
inserted into the same holes on both sides of the
Butterfly Frame (10) before performing any exer-
cises.
59
