Manual Vacuum-Lifter
Seite 3 von 7
-
vacuum-lifter T may only be operated by appropriately authorized persons. Each operator
must have read and understood this documentation
-
before each use check the bearing parts and welds for damage! For the shortcomings in the
operation of the vacuum-lifter is set T and the use by third must be prevented by suitable
measures!
-
check the seal lip damage and provide you with a damaged lip for decommissioning, by
making the device or machine not useable and ensure that no danger for others out!
-
Keep the work area provides for a base of enough support and slip resistance!
-
Make sure that the surface on which you place the stone slab has sufficient capacity!
-
Make sure that the sealing lip of the vacuum lifter T lie completely on the slab!
-
Make sure that the stone slab to be lifted in the support area of the vacuum lifter T is dust-
free and dry. The surface finish of the stone slab to be lifted must be ground smooth in the
support area of the vacuum lifter T and beyond the stone slab in the contact area must be
flat!
-
Make sure that the vacuum lifter T is recognized in the focus of the stone slab! If excessive
inclination of the slab the vacuum lifter T must be set accordingly!
-
The compressed air supply must not be switched off when the vacuum lifter T a stone plate is
sucked!
-
Excessive rocking or shaking of the suspended load are not allowed!
-
The vacuum lifter T may be sucked in and transported one at a stone slab!
-
Keep the work area clean and provide them adequate lighting!
-
walk under suspended loads is prohibited!
-
Wear when handling vacuum lifter t always wear appropriate protective clothing, according
to the accident prevention regulations!
These includes for example:
• Protective gloves
according to the accident prevention regulations!
•
footwear according to the accident prevention regulations!
• Hearing protection
and safety glasses according to the accident prevention regulations!
-
Use suitable only for the properties of the device workpiece materials, such as stone slabs
without cracking ("healthy" stone plates)!
-
Ensure that no one is being used in the vicinity of the device to reduce the risk of others!
-
Check that all parts are correctly installed!
-
If damage or malfunction of the device, so you immediately contact the dealer or
manufacturer!
